Test & Lab Deals

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

The Olympus VANOX Stereo at $800 gives you enough bandwidth and sample rate to debug most digital and analog circuits. Check whether probes are included (good probes cost $30-80 each) and whether firmware is up to date — older firmware sometimes has triggering bugs.

The Hanmatek HM310P Programmable at $82 offers clean DC output with low ripple — important for sensitive analog circuits. Check the current limit accuracy: a supply that says 1A but delivers 1.2A can cook your circuit under test.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

At $59, the Hakko 942 Soldering heats up fast and holds temperature accurately — which matters more than peak wattage. Budget for proper solder (63/37 eutectic or lead-free), flux, and tip cleaner. A fine tip for SMD plus a chisel tip for through-hole covers most jobs.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

The HP Hewlett Packard at $400 covers the frequency range needed for most RF design and debugging. Verify calibration status before buying: recertification costs $200-500 if overdue. Older CRT-based units can still make perfectly accurate measurements if maintained.

The LEICA EZ4W Stereo at $1296 gives you enough bandwidth and sample rate to debug most digital and analog circuits. Check whether probes are included (good probes cost $30-80 each) and whether firmware is up to date — older firmware sometimes has triggering bugs.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

The Hantek 1025G Arbitrary at $332 covers the frequency range needed for most RF design and debugging. Verify calibration status before buying: recertification costs $200-500 if overdue. Older CRT-based units can still make perfectly accurate measurements if maintained.

At $249, the Professional 70W Soldering heats up fast and holds temperature accurately — which matters more than peak wattage. Budget for proper solder (63/37 eutectic or lead-free), flux, and tip cleaner. A fine tip for SMD plus a chisel tip for through-hole covers most jobs.

The agilent oscilloscope 100mhz at $299 gives you enough bandwidth and sample rate to debug most digital and analog circuits. Check whether probes are included (good probes cost $30-80 each) and whether firmware is up to date — older firmware sometimes has triggering bugs.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

The FY3225S 25MHz Dual-Channel at $79 covers the frequency range needed for most RF design and debugging. Verify calibration status before buying: recertification costs $200-500 if overdue. Older CRT-based units can still make perfectly accurate measurements if maintained.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.

The FY2300 Dual-Channel DDS at $90 covers the frequency range needed for most RF design and debugging. Verify calibration status before buying: recertification costs $200-500 if overdue. Older CRT-based units can still make perfectly accurate measurements if maintained.

The DDS Function Arbitrary at $94 covers the frequency range needed for most RF design and debugging. Verify calibration status before buying: recertification costs $200-500 if overdue. Older CRT-based units can still make perfectly accurate measurements if maintained.

The FeelTech FY6600-60M Dual at $95 covers the frequency range needed for most RF design and debugging. Verify calibration status before buying: recertification costs $200-500 if overdue. Older CRT-based units can still make perfectly accurate measurements if maintained.

Test equipment is expensive new and depreciates slowly — buying used is standard practice in the industry. Check the calibration date, ask about included accessories (probes, cables, manuals), and verify that the seller has a return window. Test equipment that's been sitting in storage for years may need capacitor replacement before it works reliably.